Connecting to the Local User Interface

In order to update the local software version, a connection to the machine

must be established in one of two ways:

1 Using the static IP address assigned on the customer's network

2 Physically connect to the machine using the management console.

Customer's Static IP Address

A static IP address is recommended during implementation for ease of access to the local software. This will ONLY work when connected to the customer's network.

1 While connected to the customer's network, open a web browser.

In the URL address line, type "https://" followed by the Static IP

2 Address assigned to this machine. The SecuraStock software login page should appear.

Physical Connection to Machine

A physical connection must be established to the machine for machines that do not have a static IP address or for users who do not have access to the customer's network. To do this, one MUST have a laptop and an Ethernet cord. Do not unplug any Ethernet connections or AC Power cords within or outside of the unit.

Use an Ethernet cable to connect a laptop to the black RJ45

1 Ethernet port on the Management Console. (It is located directly below the white port connecting the machine to the customer's network .)

2 While connected to the machine, open a web browser.

In the URL address line type: "https://192.168.44.3". The

3

SecuraStock login page should appear.

**If the SecuraStock login page does not appear, try disabling the wireless connection of the laptop.