Leveling

SecuraStock must be level for proper operation. You can visualize whether or not the unit is level by looking at the top

of the doors when both doors are closed. The top of the doors should be even on both sides. If the door tops are tilted, the unit is not level. You can also use the level from the installation tool kit to make sure the SecuraStock is level.

02

Level SecuraStock BEFORE loading products or equipment into it.

The leveling legs on the bottom of the unit can be height-adjusted to level SecuraStock. The legs are threaded into the

underside of the unit. Use the crescent wrench included in your tool kit to adjust the legs.

1. A person should use the wrench to adjust the legs.

2. The leg height is adjusted by turning the base.

3. After the legs are adjusted, recheck the machine's level, repeat adjustment steps if necessary.

Please Note: If you plan to move the machine regularly and do not intend to make machine somewhat permanent in a single spot, only extend the front two legs.