DETERMINE ON-SITE LOCATION FOR PLACING MACHINE

SecuraStock should be placed no more than nine (9) feet from a power outlet and within five (5) feet of an Ethernet connection. (It does not have to be an Ethernet port. SecuraStock is outfitted with an Ethernet coupler that can be used to connect its Ethernet cord to another Ethernet cord.)

Make certain that the doors will open fully in this location. Leave at least six (6) inches of space between the back of the machine and any wall or obstruction for proper air circulation.

Caution: SecuraStock is intended for indoor use only; do not use outdoors. Additionally, it should not be placed in a harsh environments, or in wet locations.

1. Refer to the Site Checklist to properly select and prepare the site.

2. Each machine requires a regular 110V outlet and an Ethernet connection.

3. SecuraStock machines are 72" high, 57" wide and 26" deep (1,800mm high, 1,448mm wide and 660mm deep).

4. The area in front of the machine must be clear to open the doors. Each door is 27" (668mm) wide when fully opened. We recommend at least 64" (1,626mm) of clearance in front of the machines.

5. A minimum of 6" (70mm) space is required at the back of the machine to accommodate the electrical and

Ethernet lines.

6. The machines are intended for indoor application but can also be deployed in covered outdoor applications.

The normal operating temperature range is 15-120F (-9.4 -49C).

7. The machines are not water tight and should not be exposed to direct stream moisture.